Financing As Low As 0% with Prequalify Now
BDS Suspension 4
BDS Suspension 4
BDS Suspension 4
BDS Suspension 4
BDS Suspension 4
BDS Suspension 4

BDS Suspension 4" Suspension System | 2014-2018 Ram 2500 4WD (Gas) w/ Rear Air Ride 1633H

$1,641.95

This item may take 2-3 weeks or more, before it's shipped, as it's on back order currently.
This item may take 2-3 weeks or more, before it's shipped, as it's on back order currently.
DESCRIPTION

BDS Suspension 4" Radius Arm Drop Suspension System for 2014-16 Ram 2500 Gas 4WD w/Rear Air Ride Gas Only

 

This 4" Radius Arm Drop System uses a pair of 1/4" thick steel radius arm relocation brackets to reposition the factory radius arms and correct suspension geometry and caster at 4" of lift. These brackets are designed for quick installation and create a stout mounting location for the radius arms by tying into both the factory radius arm frame mount and the side of the frame rails.

 

The additional height comes from a pair of specially designed progressive rate ProRide coil springs. The 4" coils have been engineered and tested to improve the ride quality and performance across all terrains while holding up to the rigors that heavy duty truck owners demand. A heavy duty track bar relocation bracket is included to recenter the front axle once lifted as well as a forged drop pitman arm to correct steering angles. Sway bar relocation brackets are used to reposition the front sway bar assembly and the supplied brake line brackets allow for the easy adjustment for the stock lines to be reused with the lift kit.

 

In the rear, 1/4" steel, 3.5" tall gusseted air bag spacers are used along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX² series or FOX 2.0 shocks.

    • Tire & Wheel Combinations
    • 37x12.50 w/17", 18", 20"x9 and 5.625" back spacing
    • 35x12.50 w/17", 18", 20"x9 and 4.5" back spacing

*Trimming may be required*

  • Est. Installation: 6-8 hours
  • Difficulty Level (easy 1 - 5 complicated): 3

Important Kit Notes

  • 1. Not for use with factory rear coil spring suspensions
  • 3. Indexing ring only fits 6 bolt transfer cases (most common). Some heavy-duty tow package vehicle coul have 8-bolt transfer cases (w/heavy-duty Aisin 6 speed transmissions), order 122813.
  • 4. Will not fit RAM 2500 Powerwagon models
  • 5. Models equipped with 2 piece rear driveshaft may require carrier bearing drop kit # 122405
  • 6. Will not fit Cab and Chassis models
REVIEWS

RELATED PRODUCTS

BACK TO TOP